Installation guide

How to Convert a Home Subwoofer into a Car Audio Subwoofer

Posted on Sunday, October 16, - Posted on Monday, October 17, - If any one knows plz tell me how to do it and what i need to do it!! Cyrus Silver Member Username: Eric Zeppelin Bronze Member Username: If you have an old computer, you can take the power supply out of that. He gave a link in one of his posts. Christopher Lee Silver Member Username: But yes its possible. Look at the adapter and make sure it transfers your AC volts into a or So if you could make it a lil easier to understand thatd be great..

If you could explain usin these thatd be awesome. It's a FlameQ watts peak and the amp watts peak. Locate the sub woofer positive and negative cables. There are no standards on what color these cables will be, in this case they were brown and black. Note, it is very important you identify these cables before cutting the sound cable.

Help wiring car audio in house - Audio - Audio

Once you've connected the sound cable you can finish attaching the rest. Your left and right positive to your positive cable, your left and right negative to the negative cable. Lastly, wire your sub to the amp, plug your power supply into an outlet, get sound to your system and enjoy! Please enable JavaScript to watch this video.

How to use your car amplifier at your house using a power supply

Share Your Thoughts Click to share your thoughts. Refer to the Pinout diagram to know which color the grounds are. Plug in you power supply to the wall and it should power on. My amp is taking current but not giving output and the light of the amp is off the green light is off. The amp will not turn on if the remote wire is not hooked up and powered. Last, make sure the ground wire is connected and grounded properly.

A bad ground is the cause of most troubles. Not Helpful 0 Helpful 0. Yes, you can use normal home entertainment system stereo speakers with your "new" computer power-supplied indoor car audio amplifier!

Preparing for the installation

How do I connect a power supplier that has two black wires, a red wire, and a yellow wire? You only need the yellow and black wires. The red wire is not needed to power your amp. I have a watt Sony Xplod car amp and a 12v 34ah power supply.

How to Hook Up a Car Amp Inside the House to a Wall Outlet

There shouldn't be any problems as long as you are pushing speakers or sub that is in that range. You couldn't push an earthquake hole 15" with it, but you could push a pair of 10's or 12's. Not Helpful 1 Helpful 0.

The power LED is on, but the amplifier is still not producing sound.